FUTABA 7XC - Page 68

Setting direction
- Tap [Nor.] / [Rev.].
(Nor.) Normal / (Rev.) Reverse
Setting type
- Tap [Nor.] / [Alt.].
(Nor.) Normal / (Alt.) Alternate
68
Function
2
(Changing the operation direction)
Tap [Nor.] or [Rev.] to set the direction.
(Changing the the type of operation)
Tap [Nor.] or [Alt.] to set the type.
3
(Stick switch setting)
This is a function that uses the steering stick and the throttle
stick as a switch.
Tap the set value of the position of the
steering switch or throttle stick switch. Value
input buttons appear on the screen and use
the [+] and [-] buttons to set the switch ON/
OFF position. Alternatively, you can set it by
holding the steering stick or throttle stick at
the point where you turn it ON/OFF and tap
the [set]. Fine adjustment is possible with [+]
and [-].
The red range of the bar graph is ON.
4
When finished, return to the Linkage menu screen by pressing the HOME button.
Adjust button
Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Steering point
0~100
Initial value:100
Stick point
-100~100
Initial value:100
Switch Select