FUTABA 7XC - Page 96

Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
* Throttle throttle stick position
Servo travel
Throttle point
Throttle point
Throttle point
Reverse direction
Neutral
Normal direction
High
96
Function
Traction control
Throttle point
5~95
Initial value: 30
6
("Throttle point" setup)
Tap the value button of the [Throttle point]. Value input but-
tons appear on the screen. Use the [+] and [-] buttons to ad-
just the operation point.
- Sets the throttle stick position at which the traction control function is per-
formed. The number is the % display with the full brake position made 100.
Tap [Normal] or [Reverse] to set the operating range.
"Normal" : High range from the throttle stick point to the operating range.
"Reverse" : Operating range from neutral to throttle stick point.
7
When finished, return to the Racing menu screen by pressing the HOME button.
Use SW1 to SW6 to switch the
"
Traction control
"
function ON/OFF.
See the
"
Switch select
"
function (page 67).
Switch setting
The throttle return amount, delay amount and cycle speed can be adjusted with digital
trim DT1 to DT6 or digital dial DL1, with the
"
Trim / Dial select
"
function (page 64).
Dial / Trim Setting