CHAPTER 7: Using Drives and Ports
82
10 Type the title you want to appear on your menu in the Menu Caption Text box.
11 After you set up your DVD, click . The Configuration/Information dialog box opens.
12 Click the Video tab, then select the television and audio format for your DVD.
13 Click the Burner tab.
14 If you have one DVD burner, click Burn. The Burning dialog box opens and Power2Go burns
the files to the DVD.
-OR-
If you have more than one DVD burner, select the burner, then click Burn. The Burning
dialog box opens and Power2Go burns the files to the CD or DVD.
15 When a message tells you that the recording is complete, click OK to start the LabelPrint
program or Cancel to return to Power2Go.
Creating a video DVD using Windows Media Center
To create a video DVD using Windows Media Center:
1 Insert a blank, writable DVD-R or DVD-RW disc into your recordable DVD drive.
2 Press the Start button on the remote control. Media Center starts.
Important
We recommend that you do not use your computer for other tasks while
creating CDs or DVDs.
If you record copyrighted material on a CD or DVD, you need permission
from the copyright owner. Otherwise, you may be violating copyright law and be
subject to payment of damages and other remedies. If you are uncertain about
your rights, contact your legal advisor.
8511879.book Page 82 Thursday, February 15, 2007 10:39 AM
To Next Page
Loading...
Need help?
General
