GE Security CS575 User Manual

CS875-575-375-275-175 Installers Manual with CS5500 keypad B.11.2
11.3 Programming the CS535 voice module
You must enroll and default the CS535 voice module before you begin to program the system. For more
information on enrolling and defaulting, see chapter B-1 Enrolling modules. To program the CS535, select
Installer Menu>CS535 Voice Module.
11.3.1 Configuring the control panel for voice reporting
You must enable event reporting in the control panel and program the zones types for which reports are sent.
You must also map each event to a recorded message. You can map one message to a number of events. For
more information see chapter B-2 Programming the control panel.
Events can be reported to six phone numbers. Each phone number has it own account code, protocol and events.
You must program this information for phone number 1 at least. You can also set number of dial attempts and a
dialer delay for voice reporting.
For more information, see chapter B-2 Programming the control panel.
< To allow a user to cancel reports and stop voice reporting by entering a user code, enable the abort all
function. This is useful in the case of a false alarm. Select Control Panel>System Settings>Feature
Select>Miscellaneous>All Abort>Enabled and press OK.
11.3.2 Recording voice messages
The CS535 voice module can store up to 18 recorded voice messages. There must be one leader message and one
address message. There can be an optional kiss off message. The remaining 15 messages are event messages.
The messages can be recorded altogether or one at a time. Some events may be covered by one message. The
following steps explain how to record different messages.
1. Connect a telephone handset to the phone jack on the CS535 voice module.
2. Navigate with the µ¶ keys to CS535 Voice Module>Recording and press OK.
3. Complete one of the following steps depending on the message(s) you want to record.
- To record all messages, scroll to All in Sequence and press OK.
- To record one message at a time, scroll to the relevant menu option and press OK. For example, to
record the leader message, scroll to Leader Message and press OK.
- To record a single event message, scroll to Single Event Message and press OK. Select the number of
the message (1-15) and press OK.
- To record a range of event messages, scroll to Multiple Event Message and press OK. Select the number
of the first message (1-15) and press OK.
4. Press the recording/playback button on the CS535 voice module and record the message.
All in Sequence
Leader Message
Messa
g
e 1
Recording
Handshake Digit
Kiss Off Digit
Model
Version
Default Settings
Single Event Message
Multiple Event Messages
Address Message
Kiss Off Message
Playback
All in Sequence
Leader Message
Single Event Message
Multiple Event Messages
Message 1
Address Message
Kiss Off Message
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.1.1
11.1.2
11.1.6
11.1.5
11.1.4
11.1.3
11.2.1
11.2.2
11.2.6
11.2.5
11.2.4
11.2.3
11.1.3.1
11.2.3.1
Messa
g
es 2 - 15
Same as above
Messa
g
es 2 - 15
Same as above

GE Security CS575 Specifications

General

Brand	GE Security
Model	CS575
Category	Security System
Language	English