GE 269Plus - 8.8 ENTERING SETPONITS

8- 6 269Plus Motor Management Relay GE Power Management
ENTERING SETPONITS 8 269PC SOFTWARE
8
8.8 ENTERING SETPONITS
The following example illustrates the entering of setpoints from the 269PC software.
1. Select the Setpoint > Motor Amps menu item
2. From the Setpoints / Motor Amps window select the Motor Specs tab.
3. The following dialog box appears where setpoint information for the 269Plus is to be entered:
4. For setpoints requiring numerical values click the mouse pointer anywhere inside the setpoint box. This will
cause a numerical keypad to be displayed showing the OLD value, RANGE and INCREMENT of the set-
point value being modified.
Enter the new value by clicking on the numerical
keys or typing the number directly.
Click on Accept to exit the keypad and
keep the new value.
Click on Cancel to exit from the keypad and
keep the old value.