GE AKTA avant - Page 212

85 to 180 mm
tubes
50 to 85 mm
tubes
30 to 50 mm
tubes
1
Inserts
L-shaped cutoutSingle cutoutSingle cutoutTube guide
Single cutoutSingle cutoutSingle cutoutTube holder
1
For 30 to 50 mm tubes, first insert the tube guide from the 18 mm rack using the single cutout,
before inserting the tube support for the 30 mm rack.
Assembly instructions
Follow the instructions to assemble the tube rack.
ActionStep
Insert the tube support (4), if required, into the bowl (3). The circular marks
on the tube support should face down.
1
1
2
3
4
5
6
Note:
When assembling a tube rack, single cutouts (1) and L-shaped cutouts (2), are
used for various inserts depending on the length of the collection tubes. See
Single and L-shaped cutouts, on page 211 for detailed information.
Insert the tube guide (5) with the tube position numbers upwards. The tube
guide should rest about 1 cm above the tube support.
2
212 ÄKTA avant User Manual 29035184 AE
5 Operation
5.8 Fractionation
5.8.2 Prepare Fraction collector F9-R