ActionStep
Insert the tube holder (6) with the tube position numbers upwards:3
Check that tube position 1 (7) is directly above tube position 1 (7) of the tube
guide.
•
Push the flexible bowl out at each rib and snap the tube holder under
the top lip of the rib (8).
Note:
Do not force the tube holder into place as this may damage the lip.
•
Check that the surface of the tube holder is level.
4
Gently move the delivery arm (10) out to the outer stop.5
ÄKTA avant User Manual 29035184 AE 213
5 Operation
5.8 Fractionation
5.8.2 Prepare Fraction collector F9-R
To Next Page
Loading...
