ActionStep
In the New Method dialog.2
•
In the System list select the name of the system.
•
Click Predefined Method, then in the Predefined Method list, click System
CIP.
•
Click OK.
Result: One Method Settings phase and three System CIP phases show in
the Method Outline pane. Each System CIP phase uses one cleaning solution.
If desired, add additional System CIP phases to the method using the Phase
Library.
3
ÄKTA avant User Manual 29035184 AE 291
7 Maintenance
7.6 Maintenance when required
7.6.2 Perform System CIP
To Next Page
Loading...
