GE AKTA avant - Page 499

DescriptionRange/UnitRun Data
The set concentration of Q3 or the
current value during a quaternary or
BufferPro gradient
0.0% to 100.0%Conc Q3
The set concentration of Q4 or the
current value during a quaternary or
BufferPro gradient
0.0% to 100.0%Conc Q4
The conductivity signal.0.00 to 999.99 mS/cmCond
The conductivity signal as a percent-
age of a set range.
0.0% to 100.0%% Cond
The temperature signal (in the conduc-
tivity flow cell).
0.0°C to 99.0°CCond temp
The set position of the Injection valve.N/AInject
The set position of the Loop valve.N/ALoop position
The set position of the Column valve.N/AColumn position
The set flow direction position of the
Column valve V9-C and Column valve
V9H-C.
N/AFlow direction
The set position of the outlet valve.N/AOutlet
The set position of the inlet valve A.A1 - A7Inlet A
The set position of the inlet valve B.B1 - B7Inlet B
The set position of the sample inlet
valve.
S1 - S7, buffSample inlet
The set position of the pH valve.N/ApH valve
The set position of the versatile valve.N/AVersatile valve
The set position of the versatile valve
2.
N/AVersatile valve 2
The set position of the versatile valve
3.
N/AVersatile valve 3
The set position of the versatile valve
4.
N/AVersatile valve 4
The set position of the X1 valve.N/AValve X1
ÄKTA avant User Manual 29035184 AE 499
9 Reference information
9.9 Available Run data