GE akta start - Page 16

FunctionDescriptionPart
To connect a USB memory stick for storage of
results and transfer of files.
Note:
USB hard drives are not supported.
USB port5
Illustration of the Fraction
collector
The illustration below shows the Fraction collector (Frac30), showing the front and rear
views.
ÄKTA start does not support fractionation with any fraction collector other
than Frac30.
Note:
7
1
2
3
4
5
6
Rear viewFront side view
FunctionDescriptionPart
Holds and positions the tubing holder for dispens-
ing the liquid into fractions.
Dispenser arm
assembly
1
Holds the tubing used for dispensing the liquid
fractions into the collection tubes.
Tubing holder2
10 to 18 mm diameter tubes used to collect the
fractions.
Collection tubes3
Holder for collection tubes, which supports tubes
of four sizes.
Bowl assembly4
Case for electromechanical assembly and holder
for the Bowl assembly.
Base unit5
16 ÄKTA start Maintenance Manual 29060308 AD
2 System description
2.1 System overview