3.4 Instrument Display
Introduction
This section describes how to calibrate and test the Instrument display.
In this section
This section contains the following subsections:
See pageSection
313.4.1 Touch screen calibration
343.4.2 Color test
353.4.3 Diagnostics
363.4.4 Log book
Instructions
Follow the instructions below to select an option to calibrate and/or diagnose the Instru-
ment display.
ActionStep
In the Settings and service screen, tap Next:Next to access the 3rd screen.1
Result: The following screen opens.
ÄKTA start Maintenance Manual 29060308 AD 29
3 Maintenance operations
3.4 Instrument Display
To Next Page
Loading...
