GE akta start - Log Book

3.4.4 Log book
Description
The Log Book displays the number of hours the Instrument Display has been used. The
number of hours should be reset to zero when the Instrument Display is replaced.
The instrument display must be replaced by a GE Service Engineer.
Note:
Instructions
Follow the instructions below to read the Log book for the Display.
ActionStep
In the Display screen, tap Log book.1
Result: The following screen opens.
The screen displays the number of hours the Instrument Display has been
used.
36 ÄKTA start Maintenance Manual 29060308 AD
3 Maintenance operations
3.4 Instrument Display
3.4.4 Log book