GE akta start - 4 Troubleshooting

4 Troubleshooting
About this chapter
This chapter contains information regarding troubleshooting procedures. Warning
messages and Error codes are provided, and possible causes and solutions to those
codes are described.
In this chapter
This chapter contains the following sections:
See pageSection
944.1 UV
964.2 Conductivity
974.3 Frac30
984.4 Pump
994.5 Pressure sensor
1004.6 Main board and Power Supply
1014.7 System related error messages
1024.8 Troubleshooting flow charts
Introduction
For ÄKTA start and Frac30 there are two kinds of Troubleshooting procedures:
•
Basic - Application related troubleshooting. For instructions, refer to section Basic
Troubleshooting in ÄKTA start Operating Instructions.
•
Troubleshooting with the aid of Warning messages and Error codes displayed on
the Touch Screen. This is described in this chapter.
For information about Troubleshooting related to UNICORN start, refer to the UNICORN
start User Manual.
ÄKTA start Maintenance Manual 29060308 AD 93
4 Troubleshooting