GE akta start - Clean before Planned Maintenance or Service

3.2 Clean before planned maintenance or service
On site service and product
return
To ensure the protection and safety of service personnel, all equipment and work areas
must be clean and free of any hazardous contaminants before a Service Engineer starts
maintenance work.
Where it is stated that planned maintenance and/or service of ÄKTA start must be per-
formed by GE service personnel, a Health & Safety Declaration Form must be completed
before this is started.
Please complete the checklist in the On Site Service Health & Safety Declaration Form or
the Health & Safety Declaration Form for Product Return or Servicing, depending on
whether the instrument is going to be serviced on site or returned to GE for service, re-
spectively. Copy the form you need from Section 6.1 Health and Safety Declaration Form,
on page 155 or print it from the PDF file available on the User Documentation CD.
26 ÄKTA start Maintenance Manual 29060308 AD
3 Maintenance operations
3.2 Clean before planned maintenance or service