GE akta start - Page 25

See sectionMaintenance action
Section 3.5.1 UV LED calibration, on
page 39
Calibrate the UV flow cell
Section 3.11 Conductivity Monitor, on
page 68
Calibrate the Conductivity cell
Section 3.12 Pressure sensor , on
page 75
Pressure sensor zero offset
ÄKTA start Operating InstructionsReplace the inlet filters
ÄKTA start Operating InstructionsReplace the tubing and connectors
ÄKTA start Maintenance Manual 29060308 AD 25
3 Maintenance operations
3.1 Regular maintenance schedule