3 Maintenance operations
About this chapter
Regular maintenance of ÄKTA start is essential for reliable function and performance.
This chapter provides instructions for periodic maintenance, including calibration and
configuration, as well as other required maintenance.
In this chapter
This chapter contains the following sections:
See pageSection
233.1 Regular maintenance schedule
263.2 Clean before planned maintenance or service
273.3 Access the modules
293.4 Instrument Display
383.5 UV Monitor
483.6 Pump
563.7 Buffer valve
593.8 Sample valve
623.9 Wash valve
653.10 Outlet valve
683.11 Conductivity Monitor
753.12 Pressure sensor
773.13 Frac30
833.14 System
923.15 Main board
ÄKTA start Maintenance Manual 29060308 AD 21
3 Maintenance operations
To Next Page
Loading...
Need help?
General
