GE akta start - Frac30

4.3 Frac30
Error messages
ActionPossible causeDescriptionError code
See
Troubleshooting Flow chart 4, on
page 105
•
The cable connected be-
tween ÄKTA start and Frac30
is not working.
•
Drive sleeve worn out.
•
Sensors are not working.
•
The Frac30 internal cable is
not working.
•
Motor failure.
•
Main board failure.
Fraction collec-
tor failure
301
ÄKTA start Maintenance Manual 29060308 AD 97
4 Troubleshooting
4.3 Frac30