Connectors
DescriptionPart
Signal connector for analog input and output signals.Analog in/out
Connector used to connect the I/O-box to the ÄKTA pure instru-
ment.
UniNet-9
Status indicator for service purposes.Status
Switches used to configure I/O-box E9 as I/O-box E9 or I/O-box
E9, 2nd.
Node ID
Signal connector for digital input and output signals.Digital in/out
114 ÄKTA pure User Manual 29119969 AB
3 ÄKTA pure external modules
3.5 I/O-box E9
3.5.1 Overview of the I/O-box
To Next Page
Loading...
