GE AKTApure - Before You Prepare the System

5.1 Before you prepare the system
Introduction
It is important to prepare the system in accordance with the settings in the method to be run. Before
preparing the system, check the settings in the Method Editor and make sure that all accessories to
be used are available.
Checklist
Make sure the system is prepared in accordance with the settings in the method to be run. Depending
on configuration, remember to check:
•
which valve ports to use for inlets and outlets
•
which column type to use
•
which column position to use
•
which buffers and samples to prepare
•
which sample application technique to use
•
that the pH electrode is connected and calibrated
150 ÄKTA pure User Manual 29119969 AB
5 Operation
5.1 Before you prepare the system