GE AKTApure - Create a Method and Perform a Run

5.9 Create a method and perform a run
Introduction
This section provides an overview of how to create a method in UNICORN and how to perform manual
and method runs on ÄKTA pure.
It also contains advice on things to be considered during a run.
In this section
This section contains the following sub-sections:
See pageSection
2125.9.1 Create a method
2175.9.2 Prepare and perform a run
2195.9.3 Monitor a run
2215.9.4 After run procedures
ÄKTA pure User Manual 29119969 AB 211
5 Operation
5.9 Create a method and perform a run