4.2.5 Configuration of Versatile valves
System properties
Follow the instruction below to update the system properties.
ActionStep
Open the system properties Edit dialog.1
Select Valves and pumps from the Component types list.2
Select Versatile valve (V9-V), Versatile valve 2 (V9-V), Versatile valve 3 (V9-V) or Versatile
valve 4 (V9-V) in the Component selection list.
3
System settings
If the valve is placed in the flow path between the UV monitor and the outlet valve, the delay volume
must be set. See Check/Set delay volume, on page 146.
ÄKTA pure User Manual 29119969 AB 137
4 System configuration
4.2 Configure modules
4.2.5 Configuration of Versatile valves
To Next Page
Loading...
