GE AKTApure - Replace Pump Rinsing System Tubing

7.8.13 Replace pump rinsing system tubing
Maintenance interval
Replace the pump rinsing system tubing when required , for example if the tubing is clogged or damaged.
Replacement instructions for the system pumps and the sample pump (external module) are given
below.
Required material
The following material is required:
•
Rinsing system tubing
System pump piston rinsing system
The illustrations below show the parts and tubing of the system pump piston rinsing system
1
2
3
4
5
DescriptionPart
Rinsing system tube holder, top1
Rinsing system tube2
Rinsing system tube holder, bottom3
Outlet tubing4
Inlet tubing5
352 ÄKTA pure User Manual 29119969 AB
7 Maintenance
7.8 Replacement procedures
7.8.13 Replace pump rinsing system tubing