6 Performance tests
About this chapter
This chapter provides information about performance tests.
Performance tests should be run after installation to check the function of the ÄKTA pure system. Dif-
ferent tests are available and the tests to perform depend on the system configuration used.
Performance tests can also be used at any time to check the condition of the system, for example,
after a prolonged stop. This chapter describes how to prepare, run, and evaluate the different perfor-
mance tests available.
In this chapter
This chapter contains the following sections:
See pageSection
2266.1 General performance test actions
2296.2 Air sensor A and Inlet valve A tests
2316.3 Air sensor B and Inlet valve B tests
2336.4 Air sensor S and Sample inlet valve tests
2356.5 Column valve C tests
2376.6 Fraction collector F9-C test
2406.7 Fraction Collector F9-R Test
2426.8 Sample pump tests
2446.9 System Test UV U9-L (fixed)
2486.10 System Test UV U9-M (variable)
ÄKTA pure User Manual 29119969 AB 225
6 Performance tests
To Next Page
Loading...
