7.6 Maintenance when required
Introduction
This section gives instructions for maintenance activities to be performed when required.
In this section
This section contains the following subsections:
See pageSection
2777.6.1 Clean the instrument externally
2787.6.2 Perform System CIP
2847.6.3 Perform Column CIP
2887.6.4 Clean Fraction collector F9-C
2907.6.5 Clean Fraction collector F9-R
2917.6.6 Storage of the pH electrode
2937.6.7 Clean the pH electrode
2967.6.8 Clean the pump head check valves
2997.6.9 Wipe off excess oil from the pump head
3007.6.10 Clean the Conductivity flow cell
276 ÄKTA pure User Manual 29119969 AB
7 Maintenance
7.6 Maintenance when required
To Next Page
Loading...
