ConstraintsConnectorExternal module
Fraction collector F9-R, 2nd requires Fraction collector
F9-R or Fraction collector F9-C.
F-typeFraction collector F9-R, 2nd
Cannot be used at the same time as Mixer valve V9-M
or V9H-M.
D-typeSample pump S9 and S9H
To optimize signal quality, the total cable length connecting all external modules to the ÄKTA
pure instrument should not exceed 10 m.
Note:
ÄKTA pure connector plate
The connector plate with the UniNet-9 connectors is located on the back of the ÄKTA pure instrument.
FunctionConnector nameConnector
Connector point for service.Test9
NOTICE
Do not connect any module to the connector Test on the ÄKTA pure instrument.
Plug all unused UniNet-9 ports (ports 1 to 8) on the ÄKTA pure instrument with jumpers.
Note:
The connector Test should be protected by a plastic lid. Do not plug the connector with a
jumper.
Note:
ÄKTA pure User Manual 29119969 AB 123
3 ÄKTA pure external modules
3.6 Connection of external modules
To Next Page
Loading...
