GE AKTApure - Page 129

ActionStep
•
In the Administration module, choose Tools:System Properties or click the System
Properties icon to open the dialog.
Result: The System Properties dialog is displayed.
•
Select the system of interest in the System Properties dialog.
•
Click the Edit button.
Note:
Only active systems can be edited.
Result: The Edit dialog is displayed.
1
Select the component type of interest from the Component types list.2
Result: All available components are shown in the Component selection list.
•
Click the checkbox to select the added component.
•
When applicable, choose the appropriate Property.
Note:
Instrument modules are referred to as Components in UNICORN.
Click the OK button to apply the changes.3
ÄKTA pure User Manual 29119969 AB 129
4 System configuration
4.1 Configuration overview