ActionStep
In the Process Picture:4
•
Click on the Injection valve and select Manual load.
Result: Injection valve is set to manual load.
If the loop is connected to:5
•
the Injection valve, continue to step 7.
•
the Loop valve, continue to step 6.
In the Process Picture:6
•
Click the Loop valve.
•
Select the position the loop is connected to, for example Position 1.
Result: The Loop valve switches to the selected position.
ÄKTA pure User Manual 29119969 AB 191
5 Operation
5.7 Sample application
5.7.3 Sample application using a sample loop
To Next Page
Loading...
