Perform a manual run
Manual runs can be convenient for procedures such as filling tubing with buffer or packing a column
with media.
ActionStep
On the Manual menu, click Execute Manual Instructions.1
Select instruction group and instruction.2
Select or enter parameter values.3
Click Insert to have several instructions performed at the same breakpoint.
Note:
Manual runs are only stored temporarily. However, you can choose to store them perma-
nently in a selected directory. To save results in a chosen directory, click Browse before
the run is started.
4
Note:
If a method run is started during a manual run, the results from the manual run are not
stored.
To perform the instructions, click Execute.5
218 ÄKTA pure User Manual 29119969 AB
5 Operation
5.9 Create a method and perform a run
5.9.2 Prepare and perform a run
To Next Page
Loading...
