GE AKTApure - Page 22

DescriptionModule
Connects a single column to the instrument.Column valve V9-Cs or V9H-Cs
Allows the user to chose flow direction through the column, or to bypass the
column.
V9-Cs
A
Out
In
B
For further information, refer to Section 2.4.8 Column valves, on page 56.
Enables the pH electrode to be included in the flow path or bypassed during
a run. The pH electrode may be calibrated when installed in the pH valve.
pH valve V9-pH or V9H-pH
For further information, refer to Section 2.4.10 pH valve, on page 61.
Directs the flow to the Fraction collector, Fraction collector 2 (out 10), any
of the ten outlet ports, or waste.
Outlet valve V9-O or V9H-O
V9-O
Out2
Out1
Frac
Out10
In
Out4
W
Out6
Out3
Out9
Out5
Out7
Out8
For further information, refer to Section 2.4.11 Outlet valves, on page 65.
Directs the flow to the Fraction collector, Fraction collector 2, the outlet port,
or waste.
Outlet valve V9-Os or V9H-Os
V9-Os
In
Frac
Out
W
For further information, refer to Section 2.4.11 Outlet valves, on page 65.
22 ÄKTA pure User Manual 29119969 AB
2 The ÄKTA pure instrument
2.1 Overview illustrations