ActionStep
Wash the Cassette tray or rack and the Cassettes (if applicable), with water and a mild
cleaning agent.
4
Lift off the Waste funnel and wash it with water and a mild cleaning agent.5
Refit the Waste funnel.
Wipe off the interior of the fraction collector using a damp cloth. Wipe off stains using a
mild cleaning agent or 20% ethanol.
6
Wipe off the Dispenser head and its diode windows (the Drop sync sensor and the Type
code reader) using a wash bottle with water or 20% ethanol and a cloth.
7
Let the fraction collector dry completely before starting a run.8
Close the door of the fraction collector.9
Result: Automatic scanning is performed.
In the System Control module, press the End icon in the toolbar.10
Result: The Dispenser head moves to home position.
ÄKTA pure User Manual 29119969 AB 289
7 Maintenance
7.6 Maintenance when required
7.6.4 Clean Fraction collector F9-C
To Next Page
Loading...
