GE AKTApure - Page 481

DescriptionInstruction name
Alarm inlet B air sensor enables or disables the air sensor alarm
for the built-in air sensor at inlet B. If the alarm is enabled and air
is detected, an alarm will be triggered and the method will be
paused.
Alarm inlet B air sensor
Alarm sample inlet air sensor enables or disables the air sensor
alarm for the built-in air sensor at the sample inlet. If the alarm is
enabled and air is detected, an alarm will be triggered and the
method will be paused.
Alarm sample inlet air sensor
Alarm external air sensor X enables or disables the alarm for the
optional air sensor number X. If the alarm is enabled and air is
detected, an alarm will be triggered and the method will be
paused.
Alarm external air sensor X
Alarm analog in X enables or disables the alarm for the analog
signal in port number X. When enabled, it sets the alarm limits for
the analog signal. If the alarm is enabled and the analog signal
falls outside the set limits, an alarm will be triggered and the
method will be paused.
Alarm analog in X
Alarm digital in X enables or disables the alarm for the signal in
digital port number X. The alarm can be triggered by either of the
signal values, 0 or 1. If the alarm is enabled and the condition set
in ‘Value’ occurs, an alarm will be triggered and the method will
be paused.
Alarm digital in X
ÄKTA pure User Manual 29119969 AB 481
9 Reference information
9.9 Manual instructions
9.9.6 Manual instructions - Alarms