Flow paths through Mixer valve
The Mixer valve (V9-M, V9H-M) has two available flow paths; By-pass, and Mixer. If the Mixer valve is
installed in the recommended location before the Mixer, By-pass allows the flow to bypass the Mixer,
and Mixer directs the flow to the Mixer.
The illustration below shows the different flow paths through the Mixer valve V9-M.
Primary flow path
Alternative flow path
DescriptionFlow path
The flow from the system pumps bypasses the mixer.By-pass
The flow from the system pumps is directed to the Mixer. Mixer is the default flow path.Mixer
ÄKTA pure User Manual 29119969 AB 49
2 The ÄKTA pure instrument
2.4 Instrument modules
2.4.5 Mixer valve
To Next Page
Loading...
