GE AKTApure - Page 82

Column clamp
The column clamp can be used to attach small sized columns. Use two clamps to attach long columns.
The illustration below shows the Column clamp.
1
2
DescriptionPart
Position for a column1
Inner end tabs2
Column holder rod
The Column holder rod can be used to attach several HiTrap™ columns. The holder has threaded ports
for HiTrap columns and tubing connectors. Push the button of the holder to attach the holder to a
holder rail.
The illustration below shows the Column holder rod.
1
2 3
DescriptionPart
Snap-in to holder rails1
Button2
Column holder rod3
82 ÄKTA pure User Manual 29119969 AB
2 The ÄKTA pure instrument
2.6 Accessories