GE Datex-Ohmeda Aisys Carestation User Manual

4 Install/Service Menus
M1046983 04/08 4-19
4.5.1 Spiro Calibration The Spiro Calibration instructions appear when the focus is on Spiro
Calibration menu item.
Instructions
Spiro Calibration menu
To display TV data:
1. Connect a spirometry sensor to MGas.
2. Push the ComWheel to continue.
3. Select the correct spirometry sensor type (Adult or Pedi).
4. Use the test device to deliver a known TV through the sensor.
5. If necessary, repeat steps 1-4 for the other type of sensor.
Menu Item Values Comments
Sensor Type Adult or Pedi Select Sensor type: Adult (Dlite) or
Pedi (Pedilite).
Insp Gain
TVinsp
1000
_ _ _ ml
Exp Gain
TVexp
1000
_ _ _ ml

GE Datex-Ohmeda Aisys Carestation Specifications

General

Type	Anesthesia Machine
Manufacturer	GE Healthcare
Model	Aisys Carestation
Power Requirements	100-240V AC, 50/60 Hz
Display	High-resolution color touchscreen
Ventilator Type	Electronically controlled ventilator
Ventilation Modes	Volume Control, Pressure Control, SIMV, Pressure Support, Manual
Gas Delivery	Oxygen, Nitrous Oxide, Medical Air
Power Supply	AC mains, Battery backup
Integrated Monitoring	Yes
Communication	Ethernet
Connectivity	Ethernet
Alarms	Comprehensive alarm system for ventilation, gas delivery, and patient monitoring parameters