GE Datex-Ohmeda Aisys Carestation User Manual

12 Service Application
M1046983 04/08 12-5
12.3.2 Gas Delivery Schematic
The Softkeys at the bottom of the Gas Delivery schematic bring up related diagnostic
screens that are also accessible from the Gas Delivery Subsystem menu.
• Gas Supplies — (Section 12.8.1)
• Mixer Output — (Section 12.8.2)
• Mixer Press/Temp — (Section 12.8.5)
Notes
Settings Remarks/Values
Flow/Concentration Move slider to increase/decrease value. Use arrow keys to
fine tune setting.
O2 Concentration
(if O2 Concentration selected)
0%, 21%, 25% to 100%.
21% minimum for Air Balance Gas
0% minimum for N2O Balance Gas
Total Flow
(if O2 Concentration selected)
Off, 0.10 l/min to 0.50 l/min (in 10 ml/min increments)
0.50 l/min to 15.0 l/min (in 0.25 l/min increments)
* O2 Flow
(if Individual Flow selected)
0.00 l/min to 15.00 l/min
* Balance Gas Flow
(if Individual Flow selected)
Air = 0.00 l/min to 15.00 l/min
N2O = 0.00 l/min to 12.00 l/min
* Total Fresh Gas Flow limited to 15.00 l/min

GE Datex-Ohmeda Aisys Carestation Specifications

General

Type	Anesthesia Machine
Manufacturer	GE Healthcare
Model	Aisys Carestation
Power Requirements	100-240V AC, 50/60 Hz
Display	High-resolution color touchscreen
Ventilator Type	Electronically controlled ventilator
Ventilation Modes	Volume Control, Pressure Control, SIMV, Pressure Support, Manual
Gas Delivery	Oxygen, Nitrous Oxide, Medical Air
Power Supply	AC mains, Battery backup
Integrated Monitoring	Yes
Communication	Ethernet
Connectivity	Ethernet
Alarms	Comprehensive alarm system for ventilation, gas delivery, and patient monitoring parameters