GE Datex-Ohmeda Aisys Carestation User Manual

Aisys
7-90 04/08 M1046983
7.10.10 eVap Temperature troubleshooting
Flowchart 25
Is the Error entry
“Cass Temp”,
“Cass x-ducer”,
or “Manifold”
related?
Start
Error Log Entry
CONDENSATION CONDITIONS EXIST
VAP CONDENSATION CONDITION EXISTS
CASSETTE TEMPERATURE EEPROM FAILURE
CASSETTE TEMPERATURE FAILURE
MAN CASS OVER UNDER TEMP
MANIFOLD TEMPERATURE EEPROM FAILURE
MANIFOLD TEMPERATURE FAILURE
Cassette Temperature Related
CONDENSATION CONDITIONS EXIST
VAP_CONDENSATION_CONDITION_EXISTS
Cassette x-ducer Related
CASSETTE TEMPERATURE FAILURE
CASSETTE TEMPERATURE EEPROM FAILURE
MANIFOLD TEMPERATURE EEPROM FAILURE
Manifold Temperature Related
MANIFOLD TEMPERATURE FAILURE
MAN CASS OVER UNDER TEMP
Cass Temp
Cass x-ducer
Manifold
Indicates a warm
cassette was installed.
No service action required.
Replace
• Cassette Temperature Sensor.
•the ADB Board
Check connection of the temperature
sensors to the ADB.
If the problem persists,
• check the value of the temp sensors using
the PC Service App.
If reading does not change when the temp
cable is disconnected,
• replace the ADB.
If the reading does change,
• replace the temp sensor out of range.
VAP CASS TEMP SENSOR COMPAT FAIL
(Section 12.10.1)
AB.75.182

GE Datex-Ohmeda Aisys Carestation Specifications

General

Type	Anesthesia Machine
Manufacturer	GE Healthcare
Model	Aisys Carestation
Power Requirements	100-240V AC, 50/60 Hz
Display	High-resolution color touchscreen
Ventilator Type	Electronically controlled ventilator
Ventilation Modes	Volume Control, Pressure Control, SIMV, Pressure Support, Manual
Gas Delivery	Oxygen, Nitrous Oxide, Medical Air
Power Supply	AC mains, Battery backup
Integrated Monitoring	Yes
Communication	Ethernet
Connectivity	Ethernet
Alarms	Comprehensive alarm system for ventilation, gas delivery, and patient monitoring parameters