GE Druck DPI 620 Genii User Manual

User Manual Druck DPI620 Genii
Preparing the Instrument 1.8
On receipt of the instrument check the contents in the
box, listed in section 1.1. It is recommended to retain the
box and packaging for future use.
Install the Battery 1.9
1. Remove the five Pozidriv screws (A) (Ref: Figure 1-1).
2. Remove the battery cover.
3. Check the connections on the battery line up with the
connections in the battery compartment.
4. Place the battery in the battery compartment.
5. Replace the battery cover.
6. Secure the cover with the five Pozidriv screws.
06 June 2013 K0541 issue 1 Page 16 of 175

GE Druck DPI 620 Genii Specifications

General

Protection Rating	IP 54
Type	Multifunction Calibrator
Measurement Parameters	Pressure, Electrical
Electrical Measurement Accuracy	Up to 0.005% Rdg
Display	Color LCD touchscreen
Battery Life	8 hours typical
Communication	USB, Bluetooth, HART
Operating Temperature	-10°C to 50°C
Storage Temperature Range	-20 to 70 °C