User Manual Druck DPI620 Genii
The Druck DPI 620 Genii can be used to communicate with
other HART® field devices as follows:
• As a Primary Master the Druck DPI620 Genii starts
and controls all communications. The field device
(slave) uses each command from the master device to
make a change and/or send data back.
• As a Secondary Master the Druck DPI620 Genii is
connected into an existing HART® communications
network. The Secondary Master communicates with
the field device in between Primary Master messdages.
Start-up 6.2
FOUNDATION™ Fieldbus is started by selecting:
DASHBOARD >> HART
Task can be selected for CH1, CH2, P1 and P2. Refer to
Section 2.1.
HART® can also be selected from the CALIBRATOR
function.
Select: COMMUNICATOR channel from TASK SETTINGS
FUNCTION >> HART
06 June 2013 K0541 issue 1 Page 93 of 175
To Next Page
Loading...
