GE Druck DPI 620 Genii - Example Procedure: Measure or Simulate a Thermocouple (TC)

User Manual Druck DPI620 Genii
Example Procedure: Measure or Simulate a Thermocouple 2.12
(TC)
Figure 2-21 and Figure 2-22 show CH1 set-up to measure or
simulate a TC temperature.
To measure or simulate TC millivolts, set the TC mV function.
Figure 2-21 K-Type Thermocouple Measure CH1
(Range -270 to 1372 °C)
Figure 2-22 Figure 2 21K-TypeThermocouple Source
CH1 (Range
-270 to 1372 °C)
06 June 2013 K0541 issue 1 Page 55 of 175