GE Druck DPI 620 Genii - IDOS Option Assembly Instructions

User Manual Druck DPI620 Genii
2.14.1 IDOS Option Assembly Instructions
Step
Procedure
1.
Attach one end of the adaptor IO620-
IDOS-USB to the IDOS module
2.
Push the Type A end of USB Cable into
the USB socket on the instrument and
the type B end into the adaptor (IO620-
IDOS-USB)
3.
Set the instrument power on
When this symbol flashes at the top
of the display, it shows there is
communication between the IDOS
module and the calibrator
06 June 2013 K0541 issue 1 Page 61 of 175