User Manual Druck DPI620 Genii
Example Procedure: Measure AC Voltage (CH1) with the 2.7
AC Probe
WARNING
To prevent electrical shocks, use only the GE specified
AC probe (Part: IO620-AC) to measure AC voltages that
are more than 20 Vrms (maximum: 300 Vrms). Attach it
to the specified connections only.
Figure 2-13 shows CH1 set-up to measure an AC voltage
with the AC probe Maximum: 300 V rms.
1. Set the applicable software options for the AC Probe.
2. Complete the electrical connections Red - V/Hz
connector, Black - COM connector. Then continue with
the measure operation.
Figure 2-13 Measure AC Volts with AC Probe. Range 300 Vrms
06 June 2013 K0541 issue 1 Page 47 of 175
To Next Page
Loading...
