GE Druck DPI 620 Genii - Example Procedure: Source DC Voltage (CH1)

User Manual Druck DPI620 Genii
Example Procedure: Source DC Voltage (CH1) 2.8
Figure 2-14 shows CH1 Set-up to source a DC voltage on
CH1 (0 to 20V).
.
1. Set the applicable software options.
2. Complete the electrical connections.
3. To continue, set the applicable output value.
Figure 2-14 Source Voltage on CH1. Range 0 to 20V.
06 June 2013 K0541 issue 1 Page 48 of 175