User Manual Druck DPI620 Genii
Example Procedure: Switch Test 2.13
CH1, P1, P2 and IDOS functions use the CH2 switch
connections. CH2 functions use the CH1 switch
connections.
Switch operation
When setting the Switch Test utility on one channel, the
software automatically sets-up the other channel for the
switch connections.
Note: If there is a measure or source function on the
switch connection channel it is automatically disabled.
The display will show a screen message:
06 June 2013 K0541 issue 1 Page 57 of 175
To Next Page
Loading...
