User Manual Druck DPI620 Genii
Pressure Warnings 1.7
• Some liquid and gas mixtures are dangerous. This
includes mixtures that occur because of
contamination. Make sure that the equipment is safe
to use with the necessary media.
• To prevent a dangerous release of pressure, isolate
and bleed the system before disconnecting a
pressure connection.
• To prevent a dangerous release of pressure, make
sure that all the related pipes, hoses and equipment
have the correct pressure rating, are safe to use and
are correctly attached.
• To prevent damage to the Druck DPI 620 Genii, only
use it within the specified pressure limits.
• Do not exceed the maximum pressures stated in the
appropriate component manual for the unit under test.
• Reduce pressure at a controlled rate when venting to
atmosphere.
• Carefully de-pressurize all pipes to atmospheric
pressure before disconnecting and connecting to the
unit under test.
• Observe cleanliness when using the instrument.
• Severe damage can be caused if equipment
connected to this instrument is contaminated.
• Connect only clean equipment to the instrument. To
avoid any contamination, an external filter is
recommended.
06 June 2013 K0541 issue 1 Page 15 of 175
To Next Page
Loading...
