User Manual Druck DPI620 Genii
Software and Firmware Upgrades 1.13
1.13.1 Viewing Software Revision
The software revisions running on the DPI620 Genii can be
viewed by selecting:
DASHBOARD >> STATUS >> SOFTWARE BUILD
Note: If the software revision number is highlighted red then
an upgrade is available.
1.13.2 Upgrading the Software
Follow the website instructions to download the files onto
a USB flash memory drive.
www.ge-mcs.com
1. Select:
DASHBOARD >> ADVANCED
2. Enter the calibration PIN: 5487
3. Select the button.
4. Select:
UPGRADE
5. Continue with one of these operations:
06 June 2013 K0541 issue 1 Page 23 of 175
To Next Page
Loading...
