User Manual Druck DPI620 Genii
Example Procedure: Measure DC Voltage 2.5
Figure 2-11 shows CH1 set-up to measure a DC
voltage (0 to 30 V) or DC mV (0 to 2000 mV)
Note: When using the CH2 connectors, set-up CH2
to measure these range.
1. Set the applicable software options
2. Complete the electrical connections and continue
with the measure operation
Figure 2-11 Measure DC Volts or DC mV on CH1. Range ±30 V
06 June 2013 K0541 issue 1 Page 45 of 175
To Next Page
Loading...
