GE LOGIQ E10

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
4 - 12 Section 4-2 - Functional checks
Main Monitor Positions and Lock
When the Monitor Arm Lock is unlocked. verify the Monitor can move up/down (vertically) and left/right
(horizontally).
NOTE: The Monitor can move approximately 100 mm (3.94 inches) vertically and
250 mm (9.84 inches) horizontally.
Figure 4-4 Main Monitor Positions - Ergotron Arm
1.
Vertical Travel = 150mm
4.
Tilt
a. No Collision
b. Approximately 20º
(based on Pan Arm Off-set)
c. 85º-90º
2.
Rotation at Mount = 90º (180º
total)
5.
Monitor Translation = 350mm
(both sides)
3.
Lift Arm Rotation = 135º (270º
total)
6.
Pan Arm Rotation = 45º (90º
total)
1
2
4b
3
2
3
4c
5
6
6
4a