GE LOGIQ E10 Service Manual

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
8 - 332 Section 8-11 - Front End Acquisition / Card Cage parts replacement
2.
Disconnect the power J10, J11 (if present)
and signal/communication J14 and J13
connection(s) to the Backplane.
Remove the Batteries.
NOTE: Regulations vary for different
countries. Dispose of the used batteries in
accordance with local regulations.
Table 8-342 Batteries replacement
Steps Corresponding Graphic

GE LOGIQ E10 Specifications

General

Touchscreen	Yes
3D/4D Imaging	Yes
Applications	Vascular, Cardiac, Musculoskeletal, OB/GYN
Image Storage	USB, Network
Connectivity	DICOM, Ethernet, Wireless