GE LOGIQ E10 Service Manual

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
Chapter 8 Replacement Procedures 8 - 333
3.
Slide the replacement Batteries into the
Battery Bracket and connect the signal/
communication J14, J13 and power J10
and J11 and connectors to the Backplane.
4.
Re-install the Battery Cover.
5. Re-install Left side cover.
Table 8-342 Batteries replacement
Steps Corresponding Graphic

GE LOGIQ E10 Specifications

General

Touchscreen	Yes
3D/4D Imaging	Yes
Applications	Vascular, Cardiac, Musculoskeletal, OB/GYN
Image Storage	USB, Network
Connectivity	DICOM, Ethernet, Wireless