Scan Coach (Option)
LOGIQ V2/LOGIQ V1 – User Guide 2-19
Direction 5610736-100 Rev. 9
Introduction
Scan Assistant is a series of built-in examination and workflow
protocols, with automated exam script superimposed on them.
The protocol steps allows you to refresh what steps should be
performed in a given exam, while the superimposed automated
script allows you to focus on performing the exam by reducing
your efforts in controlling the system. Scan Assistant can help
you to increase consistency and efficiency while reducing
keystrokes. The system automatically invokes the correct mode
and imaging parameters, advances to the next step in an exam,
annotates the image, initiates measurements, and assigns the
measurements to the worksheet/report.
Scan Coach is an extension of the utility of Scan Assistant. Scan
Coach leverages the built-in examination script of Scan
Assistant and overlays it with clinical content that can be
displayed on-demand by the user to quickly refresh herself of
some key information. Refreshing such information about an
exam step just before scanning may help the user to acquire the
right scan plane. The reference image indicates how the scan
plane image for a given step should look like. The probe/beam
anime image shows the corresponding probe placement, or
beam formation for getting the correct scan plane. The schema
anime shows the key anatomical structures to be visualized in
two dimensional mode.
Scan Coach can be used as an on-demand refresher/reminder
tool in live scanning.
To Next Page
Loading...
